Canadian Training Videos

Canadian WoodWorks® Software Tutorials

Sizer Program

Beam and Column Mode Overview

Concept Mode Overview

Sizer 10 – Bearing Design

Video 1 – Bearing Design

Sizer 10 – CLT Columns

Video 2 – CLT Columns

Sizer 10 – Understanding Beam Inputs

Video 3 – Beam Mode

Sizer 10 – Lateral Stability

Video 4.1 – Lateral Stability Option

Video 4.2 – WDM Example

Sizer 10 – Understanding Load Input

Video 5 – Understanding Load Input (Beams & Columns)

Sizer 10 – Concept Mode

Video 6.1 – Concept Mode Introduction

Video 6.2 – Concept Mode Example

Video 6.3 – Concept Mode Results

Shearwalls Program

Shearwalls Overview

Shearwalls 10 – Before Designing Structures

Video 1.1 – Changing Metric to Imperial Units and Adjusting Snap Increments

Video 1.2 – Changing the Site Information

Shearwalls 10 – Flexible vs Rigid Diaphragm Design

Video 2.1 – Flexible vs Rigid Envelope (Design Approach)

Video 2.2 – Flexible Diaphragm Design

Video 2.3 – Rigid Diaphragm Design

Video 2.4 – Torsional Analysis

Shearwalls 10 – Capacity vs Deflection Based Distribution

Video 3 – Capacity vs Deflection Based Distribution

Shearwalls 10 – 3-term and 4-term Deflection Equation

Video 4.1 – 3-term vs 4-term Deflection Equation

Video 4.2 – Example 2 (3-term vs 4-term Equation)

Shearwalls 10 – Understanding the Results

Video 5.1 – Project Information and Structural Data

Video 5.2 – Design Summary and Loads

Video 5.3 – Shear Results

Video 5.4 – Hold-down Design and Drag Struts

Video 5.5 – Deflection, Hold-down Displacement and Storey Drift

Video 5.6 – Components and Cladding (C&C)

Video 5.7 – Seismic Information and Seismic Irregularities

Shearwalls 10 – Single Shearwall

Video 6 – Single Shearwall Example

Shearwalls 10 – How Quickly a Structure can be Designed

How quickly a structure can be designed

Connections 10 – Introduction

Video 1 – Connections Introduction

Video 2 – Connections Example