Online Tools for Wood Construction – CodeCHEK, FRR & STC & EMTC Calculator
Course Overview This presentation highlights the Canadian Wood Council’s suite of free, web-based fire design tools, CodeCHEK, FRR & STC Tool, and Exposed Mass Timber Calculator. CodeCHEK enables project teams to evaluate code-compliant opportunities for wood construction by assessing key building characteristics, such as height, area, sprinkler presence and more, highlighting potential pathways for alternative solutions, and clarifying where wood elements may be permitted in buildings otherwise required to be of noncombustible construction. The FRR & STC (fire-resistance rating & sound transmission class) Tool helps designers in the determination of generic fire-resistance rating designs of lightweight wood-frame wall, floor, and roof assemblies using the Component Additive Method described in Appendix D of the NBC, which is referenced as an acceptable solution in Section 3.1 of the NBC and can be used for Part 3 and 9 buildings. In addition, the tool provides the sound transmission class (STC) value that is associated with each wall or floor assembly for which STC information is available. The Exposed Mass Timber Calculator helps users assess whether mass timber compartment exposure/encapsulation designs align with the 2025 National Building Code of Canada provisions by evaluating compartment inputs against applicable criteria and generating warnings when configurations are not code-consistent, positioning it as a practical screening and learning aid that complements (but does not replace) detailed code analysis and professional judgment. Learning Objectives Evaluate code-compliant opportunities for wood construction using the CodeCHEK tool by analyzing key building parameters (e.g., height, area, and sprinklering) and identifying potential pathways for alternative solutions. Apply the FRR & STC Tool to design compliant assemblies by determining fire-resistance ratings and sound transmission performance of lightweight wood-frame wall, floor, and roof systems using the Component Additive Method. Assess mass timber exposure and encapsulation strategies using the Exposed Mass Timber Calculator to verify alignment with 2025 National Building Code of Canada provisions and support early-stage design decision-making. Course Video Speakers Bio Noah Fetterly Technical Specialist, Codes and Standards-Fire Canadian Wood Council Noah Fetterly is a Technical Specialist, Codes and Standards – Fire at the Canadian Wood Council (CWC), where he contributes technical expertise to national code development, fire safety research, and guidance for wood and mass timber construction. He holds a background in Fire Protection Engineering Technology, having graduated from Seneca College, and began his career working with fire alarm systems inspections and testing. At CWC, Noah supports technical communications, research initiatives, and industry tools related to fire performance and encapsulated mass timber construction, helping ensure alignment with the National Building Code of Canada and related standards. He is an active contributor to technical discussions involving fire safety, mass timber design, and regulatory compliance.
From Forest to Form: Sourcing Local Wood for BC Projects
Course Overview Wood and mass timber are increasingly being specified for all kinds of buildings and spaces in BC, including mid-rise and taller residential apartments, schools, and healthcare facilities. Does this mean BC will cut down more trees? On this panel, hear BC’s Chief Forester discuss the province’s forest management practices and wood supply. Learn from a recently completed project that effectively sourced local wood materials and discover the tools and resources available to assist in procuring wood products from BC’s forests. Learning Objectives Explain how British Columbia’s forest management framework governs timber supply, old-growth protection, and sustainable harvesting for wood construction projects. Identify key challenges and opportunities in sourcing local wood for BC buildings, including certification systems, Indigenous rights, supply-chain transparency, and societal expectations. Recognize strategies designers and project teams can use to responsibly procure BC wood, including collaboration with vertically integrated suppliers, community forests, and forest stewards. Course Video Speakers Bio Helen Goodland Principal, Head of Research and Innovation Scius Advisory Inc. Helen Goodland is an architect registered in the UK and has an MBA from the University of BC. As head of research and innovation for Scius, she brings over 30 years of experience working on transformative solutions for the real estate and construction industries in Canada and around the world. Helen is firmly committed to achieving truly sustainable buildings within the next decade. She is also passionate about advancing leadership opportunities for women in construction technology. To this end, she participates on numerous boards and committees. Currently she serves on the Board of Directors of Building Transformations (formerly CanBIM), the BC Digital Advisory Council, the BCIT Mass Timber Education Advisory Board and the University of Victoria’s Green Civil Engineering Advisory Council. She is also past chair of the UN Sustainable Buildings Initiative’s Materials Technical Committee. Shane Berg Assistant Deputy Minister and Chief Forester Ministry of Forests, Province of British Columbia Shane Berg is an Assistant Deputy Minister, and the Chief Forester, for the Province of BC with the Ministry of Forests. Shane obtained his BSc. in Forestry from the University of Alberta and has more than 35 years of experience working within BC’s Public Service. Shane is a registered professional forester (RPF) and has worked throughout the province, beginning as a silviculture technician in Invermere, a silviculture forester in Grand Forks, a forest planning manager in Squamish, and eventually taking on district manager roles over a span of 14 years with the BC Forest Service in northern BC (Hazelton) and the southern interior (Kamloops). He spent six years working as a regional executive director with the Ministry of Aboriginal Relations and Reconciliation until he returned to FLNR as an executive director and the deputy chief forester in 2017, a role that he held until has appointment as BC’s 18th chief forester in June of 2022. The mantra for the Office of the Chief Forester is “Caring for BC’s Forests”…and Shane’s goal as chief forester is to promote BC as a world leader in sustainable forest management. Ayme Sharma Associate Principal ZGF Architects Ayme leads ZGF Vancouver’s Building and Project Performance Team, drawing on almost 20 years of professional experience in architecture centered on building performance and environmental stewardship. Trained as both an ecologist and an architect, Ayme brings deep expertise in embodied carbon, healthy materials, high-performance envelope design including Passive House and LEED certification. Her current research delves into linking the biogenic value of wood to sustainable forest management practices in BC to understand carbon and ecosystem benefits. Ayme has cultivated an extensive network of wood industry partners that spans the entire supply chain-from First Nations forest stewards to both small- and large-scale product fabricators. Ayme brings expertise in designing one of the first CLT elementary schools in British Columbia that promotes student health and well-being. Rebecca Holt Senior Director, Sustainability hcma Rebecca Holt is an urbanist and passionate advocate for our planet. She spent her career collaborating with design teams, organizations, and researchers on strategies for high-performance buildings, neighborhoods, and cities. She leads hcma’s Impact Team, shaping how we practice, operate, and advocate. A subject matter expert with a foundation in building performance assessment and climate-responsive design, Rebecca brings decades of experience in design guidance. She is a strategist and steward of process dedicated to outcomes that respect the planet and include everyone.
Scaling Housing With Prefabricated Timber: Regulations-Ready Mid-Rise Prototypes
Course Overview British Columbia faces an urgent housing shortage and mounting pressure to accelerate delivery of multi-unit housing. Recent code changes enabling mass timber up to 18 storeys create a unique opportunity to rethink how housing is designed, permitted, and built. This session will present findings from the Housing Growth Innovation Program’s Prefabricated Timber Housing Systems project. Attendees will learn how pre-engineered, regulations-ready modular timber prototypes can streamline design and approvals, reduce embodied carbon, and speed construction through off-site manufacturing. The session will share strategies for integrating computational design, compliance analytics, and supply-chain insights to create adaptable, scalable mid-rise housing solutions. Geared to architects, developers, policymakers, and builders, participants will gain insight into how prefabrication and digital tools can de-risk projects, reduce permitting delays, and accelerate the delivery of sustainable, affordable homes in B.C. and beyond. Learning Objectives Explain how pre-engineered, regulations-ready prefabricated timber systems can support faster delivery of mid-rise, multi-unit housing under recent B.C. code changes. Identify key structural, building-services, and envelope strategies used in modular mass timber housing prototypes to improve constructability, adaptability, and permitting certainty. Recognize how digital tools, computational design, compliance analytics, and supply-chain benchmarking, can de-risk housing projects and support scalable, low-carbon construction. Course Video Speakers Bio Adrian Watson Principal, Design Director Perkins&Will Adrian Watson is Principal and Design Director at Perkins&Will, where he leads complex, high-profile projects that integrate sustainability, innovation, and design excellence. With over 30 years of experience, Adrian has shaped award-winning buildings and master plans across sectors, including higher education, infrastructure, civic, and housing. In his role as Design Director for the Vancouver and Calgary studios, Adrian leads a team of over 160 architects and designers. He is committed to the development design processes that look to the future, whilst believing that design excellence is attained by doing simple things very well. Yann Tregoat Architect Perkins&Will Originally from France, Yann’s early career was spent in Amsterdam and Paris, working on the Paris 2024 Olympic Games Aquatic Centre. Through urban environment and professional exposure, he has developed a strong interest in mass timber and parametric design, as well as innovative sustainable building solutions. Since moving to Vancouver in 2021, he has worked on various mid-to-large-scale projects, from private development to civic buildings. He brings his own life and professional experience from Europe to his work while learning and further expanding his design expertise at Perkins&Will. Yann has two master’s degrees in both Architecture and Structural and Civil Engineering from the Institute of Applied Science of Strasbourg, France. Solomon Fung Associate Principal Introba Solomon Fung is an Associate Principal at the multidisciplinary engineering firm Introba. Based out of their Vancouver office, he brings 15 years of experience to the mechanical team with a diverse project portfolio including mid- and high-rise mixed-use residential buildings, affordable housing, commercial & office buildings, passive house design, and healthcare. With a keen interest in innovation, Solomon leads his team in pursuit of simple solutions that are replicable for the industry. Brent Olund Partner, Principal Credos Brent Olund is a Professional Engineer, a Gold Seal Project Manager, and holds an MBA from the Richard Ivey School of Business. Brent’s 28 years in the construction industry to date started with industrial, commercial, and marine construction and included many years of focus on residential concrete high-rises, educational buildings, and mass timber construction. Brent is a nationally recognized expert and thought leader in the field of planning and control of mass timber structures, has worked with design teams through validation of several upcoming mass timber building assembly systems, and has designed and patented a new lateral structural system for use in these buildings. Brent believes that the highest purpose of his efforts is helping solve the housing crisis by implementing building systems toward improved productivity of construction. Andrew Blackie Structural Designer ASPECT Structural Engineers Andrew enjoys a diverse engineering background, ranging from adaptive reuse of heritage buildings through to the development of modular construction systems. As a common thread across his body of work, he brings expertise in digital workflows and parametric design to deliver an efficient, modern form of building design. Andrew graduated with a Master’s in Structural & Architectural Engineering from the University of Strathclyde in 2016 and has since gained almost a decade of experience between the UK and Canada. He joined ASPECT in 2025, where he has been developing strategies to deploy mass timber at scale and at pace. Andrew’s focus is bridging the gap between conventional and off-site construction, easing the transition away from carbon-intensive materials through a kit-of-parts approach to building structures. Halil Erhan Professor of Interactive Systems and Design Director of Computational Design Lab SFU School of Interactive Arts and Technology Dr. Halil Erhan completed his undergraduate studies at Middle East Technical University (METU) before earning a master’s degree at Clemson University, where he specialized in integrating 3D models into building design. He received his Ph.D. in Design Computation from Carnegie Mellon University, with a focus on generating design requirements. Currently, Dr. Erhan serves as a professor at Simon Fraser University and leads the Computational Design Laboratory. His interdisciplinary research approaches design as a cognitive and collaborative problem-solving process, aiming to develop effective tools that enhance the capacities of creative practitioners. He and his team create and test innovative, human-centered computational design tools. Dr. Erhan founded a research initiative called “Design Analytics,” which uses data from Performance Predictions to facilitate design space exploration through interactive visualizations. He collaborates with industry partners to encourage the adoption of new tools in the AEC sector.
Challenging Convention With Innovative Timber Applications
Course Overview This dynamic session explores cutting-edge applications of mass timber in Canadian construction through three compelling case studies that showcase how timber is revolutionizing the building industry. Attendees will discover Spearhead’s visionary approach to next-generation manufacturing through their innovative glulam facility in British Columbia. This groundbreaking project challenges conventional thinking and reimagines timber production processes, setting new standards for what’s possible in wood manufacturing. The session will also feature Intelligent City’s remarkable achievement—Canada’s first tall timber Passive House facade. This case study reveals how mass timber building envelopes can deliver exceptional environmental performance while meeting the most demanding energy efficiency standards, creating sustainable structures that perform as beautifully as they look. Finally, the session will present ETRO’s 837 Beatty project, where heritage preservation meets modern timber innovation. This thoughtful integration creates a harmonious dialogue between historical architecture and forward-thinking construction methodologies, demonstrating timber’s versatility across different building contexts. Learning Objectives Describe innovative timber applications across three case studies, including prefabricated mass timber envelope systems on tall wood buildings, next-generation glulam manufacturing, and heritage adaptive reuse with new timber additions. Identify key technical considerations for prefabricated timber building envelopes—panel sizing, air/water tightness strategies, moisture risk reduction through rapid enclosure, and crane sequencing/logistics constraints. Recognize construction and detailing approaches highlighted in the case studies, including NLT and glulam integration, concealed connection strategies (e.g., glued-in rod concepts as discussed), and coordination methods that support efficient, low-carbon timber delivery. Course Video Speakers Bio Shaun St-Amour Retrofit (Revive) Manager ETRO Construction Shaun brings a unique combination of expertise, leadership, and passion for high-performance buildings. With extensive knowledge of high-performance building standards and hands-on experience with sustainable materials and methods, he bridges the gap between design intent and construction execution. Beyond ETRO, Shaun contributes to the Passive House Accelerator, organizes Zero Carbon Building Tours with ZEBx, and hosts building science meet-ups. His expertise plays a key role in driving decarbonization, resiliency, and efficiency in both new and existing buildings. Josh Hall Partner, Director of Business Development Spearhead Josh is a Partner and Director of Business Development at Spearhead, where he helps shape the company’s vision and strategic direction. With over fifteen years of experience spanning architecture, digital fabrication, and commercial construction, his knowledge of design, process, and project delivery plays a key role in guiding Spearhead’s continued growth and evolution. Josh holds a Master of Architecture from the University of British Columbia and a Bachelor of Architectural Science from the British Columbia Institute of Technology. Shawn Keyes VP, Strategic Growth & Business Development Intelligent City Shawn is a structural engineer and commercial executive with more than a decade of experience leading innovation in mass timber and industrialized construction. As Vice President of Strategic Growth at Intelligent City, he leads commercialization, market strategy, and partnerships to scale the company’s prefabricated housing systems. Previously, Shawn served as Executive Director of WoodWorks BC, where he led a strategic transformation that strengthened partnerships, technical leadership, and influence across the development, AEC, and policy sectors. Before that, he spent over six years at Fast + Epp, developing deep expertise in mass timber and hybrid structural systems. Shawn’s teams have supported more than 150 mass timber projects across Canada, and he has served on advisory councils for BC Housing, BCIT, and the BC Office of Mass Timber Implementation. He holds an MBA from UBC Sauder, a Master of Engineering from Carleton University, and is a licensed Professional Engineer in BC and Ontario.
Tall Timber and Affordable Housing: A Case Study
Course Overview As cities face growing pressures around affordability, climate resilience, and livability, innovative projects like Catalyst’s 18-storey CLT rental development in North Vancouver offer necessary solutions. Targeted toward architects, engineers, developers, and municipal leaders, this session explores sustainable mass timber construction and affordable housing. Attendees will gain insights into using CLT in construction and the unique challenges. In-depth review of challenges such as structural grid constraints, moisture protection, and prefabricated balcony systems, and how the team transformed these into creative solutions. Furthermore, it will provide insight into integrated mixed-use programming, BIM-enhanced coordination, and the permitting process for tall wood buildings, with practical takeaways for implementing similar projects in other cities. Learning Objectives Identify how and why hybridization is commonly required at height when it comes to mass timber buildings. Explain key technical constraints and solutions for tall CLT buildings, including structural grid/panelization limits, diaphragm load paths to the core, rolling shear considerations, and balcony-to-envelope integration strategies. Apply practical construction and coordination lessons for tall mass timber—moisture management, prefabricated enclosure sequencing, BIM-based clash detection, and early supplier/contractor involvement—to reduce risk and protect the CLT during construction. Course Video Speakers Bio Rhys Leitch Principal Integra Architecture Inc. Rhys Leitch has been a principal at Integra since 2018, he has worked on award-winning projects ranging from sustainable design, high-end single-family, multi-family, and mixed-use residential developments. Originally from Australia, Rhys brings a unique approach to contemporary west coast architecture, paying special attention to the way materials, massing, and design respond to the context of a site. Recently his focus has been CLT mid and high rise projects, pushing the boundaries in different mass timber housing typologies. Sean Binns Project Director Kindred Construction Sean is a proven construction leader with over 20 years of experience delivering major residential and commercial projects across the UK and Canada. As Project Director at Kindred Construction, he leads complex builds and champions innovation in mass timber, Passive House, and modular construction. A mentor and speaker, Sean fosters industry talent through strong partnerships with local universities. Harrison Glotman Principal Glotman Simpson Consulting Engineers Harrison Glotman is a Principal at Glotman Simpson with several years of experience working on complex projects across Canada and the U.S. Prior to joining Glotman Simpson, Harrison worked on high-end homes and retrofits in some of the most iconic buildings in New York and San Francisco. He completed his Master of Science in Structural Engineering with a full scholarship to Stanford University where he specialized in seismic engineering. The knowledge gained through this degree has proven to be incredibly valuable in building design on the West Coast.
The Business Case for Mass Timber
Course Overview Mass timber is redefining how we design and deliver buildings. This session spotlights two projects at the forefront: The Exchange office building in Kelowna and a planned residential tower in Vancouver. Alongside these case studies, the speakers will present a business case analysis, breaking down costs, risks, and opportunities. Together, the speakers will share how mass timber is being applied today, the lessons learned, and why it is becoming a viable choice for development in today’s market. Learning Objectives Explain how mass timber systems are being applied in commercial and residential projects to achieve cost competitiveness with concrete construction. Identify key design, supply chain, and construction decisions that influence risk, schedule, and cost outcomes in mass timber buildings. Evaluate the business case drivers – cost, schedule, risk, and market acceptance – that affect developer decision-making for mass timber projects. Course Video Speakers Bio Annabelle Hamilton Executive Director WoodWorks BC Following the completion of her postgraduate degree from Ulster University in Northern Ireland, Annabelle has worked for several multi-family development companies, overseeing various multi-million dollar projects through the project lifecycle from acquisitions and municipal approvals to construction completion. Graham Brewster Director of Development Wesgroup Properties Graham is Director of Development at Wesgroup Properties, one of Western Canada’s largest private real estate organizations. Graham is leading Wesgroup’s mass timber exploration and execution, with an eye to not only build better buildings, but building the understanding to build a robust and sustainable industry in BC. Tim McLennan CEO Faction Projects As co-founder and CEO of Faction Projects Inc., Tim oversees a vertically integrated group of companies including Faction Architecture Inc., Faction Construction, and multiple subsidiaries—delivering full-spectrum project services from concept to construction. He leads the company’s long-term strategy, corporate governance, and financial stewardship. His leadership drives innovation across the group’s project delivery platforms—anchoring Faction’s reputation for integrated, regionally responsive, and technically advanced solutions. Neil McGowan Partner, Senior Advisor BTY Group Neill is a Partner at BTY and is responsible for providing planning and cost consulting services to financial institutions, government agencies, real estate developers and contractors. He has over 35 years of experience in British Columbia providing cost and risk advisory services. Neill is a sustainability leader and has led BTY’s team on a wide variety of projects advancing the understanding of capital and life-cycle costs of energy conservation and GHG-reduction measures for government and institutional clients.
How We Will Make Construction More Affordable
Course Overview Follow a panel of leading developers as they explore innovative strategies to reduce construction costs. Drawing from their extensive portfolios, the panelists will discuss offsite manufacturing, prefabrication, hybrid construction, and repeatable solutions that are transforming the construction industry. Discover practical approaches that streamline project delivery and drive affordability in future developments. Learning Objectives Identify strategies used to reduce construction costs through prefabrication, modular construction, and offsite manufacturing. Explain how hybrid wood systems, including CLT and lightweight panelized assemblies, are applied in mid-rise and multi-residential projects. Evaluate how standardization, repeatable building solutions, and factory-based production can improve housing affordability and project delivery efficiency. Course Video Speakers Bio Samantha Eby Executive Director ReHousing Samantha Eby is the Executive Director of ReHousing, a non-profit organization dedicated to housing creation through applied research, consultation, and education. Her work through ReHousing, developed in partnership with Michael Piper and Janna Levitt, was awarded the 2023 CMHC President’s Medal for Outstanding Housing Research. Samantha holds a Master of Architecture from the University of Toronto and a Bachelor of Architectural Studies from the University of Waterloo School of Architecture. As an architect and researcher, she explores the intersection of design, policy frameworks, and ownership models, focusing on their impact on housing projects. In 2020, she was awarded the Canada Council for the Arts Prix de Rome for Emerging Practitioners. Alongside her role at ReHousing, Samantha is a sessional instructor at the University of Toronto and an adjunct professor at the University of Waterloo School of Architecture. Mike Maxwell President Maxwell Building Consultants Mike was drawn to Waterloo for his degree from Laurier University and has seen local real estate development potential ever since. A combination of zoning bylaw rules, site data chart statistics and construction knowledge produce unique results for projects that he is involved with. He loves the math and the problem solving. In an advisory position with local governments, not-for-profit organizations, and CMHC, Mike has created strong partnerships to move the cause of affordable housing forward. Tobias Oriwol Senior Vice President, Investments Tricon Residential Tobias Oriwol is responsible for providing strategic oversight and day-to-day investment management for Tricon Residential’s Canadian purpose-built rental apartment platform, including sourcing new investment opportunities, acquisition execution, and capital raising. Prior to joining Tricon, Tobias worked at Forum Equity Partners in Toronto. Before that, he worked at Brookfield Asset Management, in both Toronto and New York, where he focused on residential housing investments and developments across market rate and affordable rental apartments, student housing, senior housing, and for-sale condominiums. Tobias has a Master’s degree in urban planning from Harvard University and an undergraduate degree in Urban Studies from Stanford University. He is also a two-time Canadian Olympian, having reached the semi-finals in both the 2008 and 2012 Summer Olympic Games. Geoff Cape CEO Assembly Corp (previously R-Hauz) For almost 35 years, Geoff Cape has been at the forefront of promoting urban innovation and environmental sustainability across diverse platforms. As CEO of Assembly Corp, Geoff has a long background in real estate and urban planning. Geoff began with a hammer, framing new builds and restoring century homes off the east coast at the age of 19. He has been a builder, planner, operator, and a long time advocate for sustainable cities, and green infrastructure. Geoff is most well known for starting Evergreen in 1991, and transforming the 42 acre site at Evergreen Brick Works in Toronto, into an internationally recognized centre for environmental excellence. Selected in 2018 as a Member of the Order of Canada, and in 1999 as “Top 40 Under 40”, Geoff has also been honoured with the Queen Elizabeth II Golden Jubilee Medal in recognition of “Canadians who have made outstanding and exemplary contributions to their communities or to Canada as a whole.” In 2007, Geoff won the prestigious Schwab Foundation’s “Social Entrepreneur of the Year” award. Geoff was founding Chair of the Sustainability Institute, past Board member of Sustainable Development Technology Canada, and the Peter F. Drucker Foundation Selection Committee. Geoff has been a regular participant and speaker at the World Economic Forum in Davos, Switzerland and on their “Future of Urban Development Advisory Board” and “Technology Pioneers Selection Committee”. Geoff is a Global Fellow of the Rockefeller Foundation. Geoff lives in the Annex neighbourhood in Toronto with his wife Valerie and three boys Toma, Ben and Sebastien, and cycles to work every day—even in blinding snow storms.
Custom Steel Connections for Mass Timber: Understanding the Basics Step by Step
Course Overview As mass timber construction continues to grow in popularity, understanding how structural connections work is essential for anyone involved in the design and construction process. This course introduces custom steel hangers as a practical and flexible solution for connecting timber beams and columns, explaining why they are sometimes preferred over off-the-shelf options. Using clear, visual examples, participants will be guided through how forces travel through a connection, what needs to be checked to ensure safety, and how factors like fire performance and moisture are considered in real projects. No advanced engineering background is required to follow along and gain valuable insight into this important aspect of mass timber design. Learning Objectives Explain the difference between predesigned and custom steel hangers, and describe situations where a custom connection offers practical advantages in mass timber construction. Describe in plain terms how structural loads travel through a steel hanger assembly, from the supported beam through to the primary supporting member. Recognize why eccentricity occurs in hanger connections and understand, at a conceptual level, how it affects the design of the surrounding structure. Identify key real-world considerations for custom steel connections in mass timber, including fire protection strategies and the importance of accounting for wood shrinkage. Course Video Speakers Bio Patrick Geers Senior Structural Designer & Head of Quality Control Western Archrib Patrick Geers brings over 24 years of expertise in mass timber engineering to his role at Western Archrib, where he leads the design of innovative structural systems and maintains the company’s exceptional quality standards. A passionate carpenter with degrees from both Canadian and German institutions, Patrick combines hands-on craftsmanship with advanced engineering knowledge. His international career spans positions in Austria and Germany, providing him with unique cross-cultural perspectives on structural design and community-centered architecture. Patrick currently serves on multiple technical committees including the CSA 086 Committee for Wood Design Standards and acts as an industry advisor to the ARTS group at the University of Alberta. His work focuses on creating sustainable structures that navigate challenging environments while connecting communities. Through his leadership in both technical innovation and quality assurance, Patrick continues to advance the possibilities of mass timber construction for buildings that serve as community anchors and exemplars of sustainable design.
Low Carbon Buildings AND Energy Systems? Yes, We Wood.
Course Overview As Toronto grows, so does the need for housing and energy. The use of wood products presents a tremendous opportunity to meet these essential needs while reducing greenhouse gas emissions and growing the local and regional economies. This panel will discuss opportunities to use wood for construction mass timber affordable housing and generation of low carbon heat and power in Toronto. The panel that ensues will explore how the strategic adoption of innovative biomass district heating systems in urban settings can reduce the carbon footprint of cities while delivering both economic and environmental benefits to rural communities. Experts from Sweden and Canada will discuss how utilizing forest residuals for urban energy needs not only cuts carbon emissions in cities but also supports sustainable forest management and strengthens rural economies. The discussion will explore how Sweden’s successful large-scale implementation of biomass district heating can be replicated in Canadian cities like Toronto, providing a renewable, low-carbon energy solution that bridges the needs of both urban and rural communities. Learning Objectives Understand how wood construction, including mass timber, can contribute to lower embodied carbon in urban development projects. Explain the relationship between building emissions, housing demand, and the need for faster low-carbon construction solutions. Describe how forest biomass and district energy systems can support low-carbon heat and power generation in cities. Course Video Speakers Bio David MacMillan Manager, Environment & Climate Division City of Toronto Katherine Sparkes Vice President, Grid Solutions EnWave Katherine joined Enwave in 2024 to lead the launch of a new business platform focused on integrating clean electricity solutions with Enwave’s district networks, customer sites and electrical grids. Katherine brings over 15 years of experience in Ontario’s electricity sector, most recently as the Director of Innovation, Research & Development with the Independent Electricity System Operator (IESO). Katherine is recognized across the Canadian energy sector for her leadership in advancing innovative clean electricity solutions, and for her ability to broker productive, effective partnerships between the private sector, utilities, and provincial and federal government. Katherine teaches in the Master of Law, Energy & Infrastructure program at Osgoode Hall and is a member of the Clean 50. Enwave is Canada’s single largest owner and operator of district energy, providing heating and cooling services to buildings through networks in Toronto, Windsor, London and PEI. Leveraging innovative solutions such as deep lake water cooling, biomass, energy from waste, sewer heat recovery, solar PV and storage, Enwave provides affordable, reliable, clean thermal energy and electricity to its real property and utility customers and partners. Gabriella Sicheri Vice President, Development CreateTO As Vice President, Development at CreateTO, the City of Toronto’s real estate agency, Gabriella Sicheri leads complex master planning projects, including the Bloor-Kipling Six Points 17-acre site created through the decommissioning of the Six Points Interchange. In her role, Gabriella reimagines the use of underutilized City assets in a way that will create meaningful space for end users and their communities, while generating important City-Building outcomes for the City. With over 18 years of experience in the public real estate sector, Gabriella has lead important City-building initiatives and key civic projects across Toronto. Prior to joining Build Toronto (now part of CreateTO), Gabriella worked for the Toronto District School Board, where she negotiated, executed and managed complex redevelopment projects, land transactions and a leased portfolio of three million square feet to leverage public assets and generate revenue in creative ways to support new building construction and renovation. In 2019, Gabriella was recognized as an Urban Land Institute Women’s Leadership Initiative (WLI) Championship Team Member, which represents outstanding women leaders and influencers in real estate and development in the Greater Toronto Region. Gabriella holds a degree from the University of Toronto and a Masters in Environmental Studies from York University. Ian Dunn President and CEO OFIA Ian has a long history in Ontario’s natural resource sector. Before the OFIA, he worked as a consulting forester and environmental scientist, undertaking projects for clients in the oil and gas, mining and exploration, nuclear energy, government, and forestry sectors. Since joining the OFIA in 2015, Ian has served in various forestry, manufacturing, and environmental policy roles. Appointed as the OFIA’s President & CEO in 2021, Ian currently oversees Association strategy, governance, public relations, and business administration. Working closely with Association membership, Ian developed a comprehensive strategic plan for the OFIA, representing a new direction and approach for the Association. Ian championed the development and continued implementation of Ontario’s Forest Sector Strategy and Biomass Action Plan, focusing on competitive measures designed to attract capital investment and strengthen the sector. He represents the OFIA softwood lumber producer’s interests in the ongoing trade dispute with the United States, developing strategies with members, and coordinating legal efforts with counsel. He actively engages in forest management planning and conservation-related files, including parks and protected areas, species at risk, carbon markets and pricing, and Indigenous relations. Serving as a public appointee to Ontario’s Species at Risk Program Advisory Committee (SARPAC), and the Boreal Caribou Conservation Agreement Working Group, Ian provides strategic advice to the province on its species at risk program. In 2019, Ian was recognized by Canadian Forest Industries magazine as one of the “”Top 10 under 40″” within the forest sector. He frequently speaks on behalf of the Association to the media, including interviews with the CBC, CTV News and Consumer Alert, Toronto Star, Northern Ontario Business, and many other local radio stations and newspapers. He has provided guest lectures at the University of Toronto and Lakehead University on forest policy and current issues in forest management. Ian is a registered professional forester and has been a full member of the Ontario Professional Foresters Association since 2013. He lives in Toronto with his wife and two children. Tom Antle Director of Engineering TorchLight Bioresources Tom Antle is the Director of Engineering at TorchLight Bioresources. He holds a BASc in Mechatronic Engineering from the University of British Columbia and a dual MSc in Sustainable Energy Systems from KTH in Stockholm, Sweden, and
Scaling Affordable Rental Housing with Tall Mass Timber
Course Overview As cities face growing pressures around affordability, climate resilience and livability, innovative projects like Catalyst’s 18-storey CLT rental development in North Vancouver offer necessary solutions. Targeted toward architects, engineers, developers and municipal leaders this session explores mass timber construction as an affordable housing solution. Attendees will gain insight into the use of CLT in construction and the associated challenges, including structural grid constraints, moisture protection, and prefabricated balcony systems. The session will also highlight how the project achieved near cost parity with comparable concrete buildings, integrated mixed-use programming, and leveraged BIM to support coordination and the permitting process. Participants will leave with practical takeaways for applying these approaches to similar projects in other cities. Learning Objectives Understand how tall mass timber hybrid systems can support affordable and mixed-use housing Identify key architectural, structural, and construction challenges unique to CLT buildings Learn practical strategies for permitting, procurement, coordination, and construction Course Video Speakers Bio Annabelle Hamilton Executive Director WoodWorks BC Harrison Glotman Principal Glotman Simpson Consulting Engineers Rhys Leitch Principal Integra Architecture Inc. Sean Binns Project Director Kindred Construction
Branching Traditions: Innovative Mass Timber in Indigenous Inspired Architecture
Course Overview Discover the transformative vision of Saskatoon’s New Central Library, a 150,000-square-foot, four-story beacon anchoring downtown’s northern edge. Inspired by Métis and Indigenous cultures, this community living room echoes the South Saskatchewan River’s rhythms, blending organic forms to connect urban vitality with the prairie landscape. As a place of healing and inclusiveness, it sparks renewal with a south-facing plaza featuring river-inspired flora for community events and a northern Indigenous landscape. This project honours the land’s stewards, fostering a welcoming hub that celebrates Saskatoon’s diverse heritage and unites all in shared cultural expression. Dive into the mass timber innovations of Saskatoon’s New Central Library in the lecture “Branching Traditions,” evoking leaf-like five-ply CLT floor plates radiating outward, distributing services via a central spine supported by a concrete core for rigidity. Explore value engineering evolution, overcoming manufacturing constraints, shipping logistics, and broad CLT floor plates without shear walls for concise structure. Celebrate adapting timber to cultural geometries, inspiring architects and engineers with sustainable, expressive insights honoring Indigenous and Métis heritage. Learning Objectives Integration of cultural expression within the rigid limitations of mass timber. Designing mass timber structures under manufacturing and shipping logistics restraints. Developing design strategies for a CLT and glulam column-and-beam system in organic architecture. Course Video Speakers Bio Alfred Waugh, Architect AIBC, AAA, OAA, SAA, FRAIC, AIA Owner, Principal Formline Architecture + Urbanism Waugh’s diverse and innovative designs have prompted national acclaim as one of the most inventive Canadian architects of his generation. As project designer for Busby Perkins Will, his Nicola Valley Institute of Technology project won a Governor-General’s Medal for architecture in 2004. Both the 2009 Squamish Lil’Wat Cultural Centre in Whistler and the 2010 First Peoples House on the University of Victoria campus have inspired locals and visitors from all backgrounds with their strong form-making and gracious interiors. Alfred Waugh is one of the few Indigenous Architects in Canada. His firm Formline Architecture + Urbanism is leading the way in defining contemporary Indigenous Architecture. His stature within Indigenous and academic communities was proven receiving a Governor-General’s Medal for the 2017 Indian Residential School History and Dialogue Centre (IRSHDC) at the heart of the University of British Columbia campus. This leading directly to his current work on the Indigenous House for the Scarborough campus of the University of Toronto and the New Central Library for Saskatoon. IRSHDC has been lauded for its integration of building and landscape, the symbolic uses of materials such as copper, and its rising to the challenge of a contemporary Indigenous design, without making specific architectural reference to any one of Canada’s many and diverse First Nations. Waugh’s creativity and independence are born of his background and education. Born in Yellowknife, Waugh enjoyed summers fishing and hunting on the East Arm of Great Slave Lake. His father, who is of English heritage, is a retired prospector, while his mother, who’s family originated in northern Saskatchewan, is a registered member of the Fond Du lac Denesuline First Nation. Waugh has an undergraduate degree in Urban and Regional Planning from the University of Lethbridge. Graduating with honours, he is the first Full Status person to graduate from UBC’s School of Architecture.
International Perspectives on Sustainable Housing Development
Course Overview Around the world there is a significant and growing housing shortage that is exacerbated by rapid urbanization and population growth. This challenge demands innovative solutions that prioritize sustainability, occupant comfort, and efficient land use. This panel discussion brings together three internationally renowned architects: Francine Houben (Mecanoo, the Netherlands), Christophe Ouhayoun (KOZ Architects, France), and Geoff Denton (White Arkitekter, Sweden) to explore their approaches to sustainable housing. Each panelist will share their unique perspective on how to address housing shortages and sustainable densification, offering insights into the latest design strategies, materials, and technologies that can contribute to more resilient and equitable urban environments. Join us for a dynamic conversation that will delve into the future of housing and the role of architecture in creating livable, sustainable cities. Learning Objectives Understand how international architects approach sustainable housing development, including wood‑based construction, urban densification, and low‑carbon strategies. Compare differing regulatory, cultural, and construction‑industry conditions that influence mass timber, modularity, prefabrication, and approval processes in Sweden, France, and Canada. Identify urban‑design principles used to create healthy, community‑oriented neighborhoods. Course Video Speakers Bio Francine Houben Founding Partner, Creative Director Mecanoo, the Netherlands Francine Houben is founding partner of Mecanoo (1984) and has led the firm to success in The Netherlands and abroad, amassing a portfolio of work that is wide-ranging, inspired by global challenges and with a sustainable view on society. Mecanoo combines the disciplines of architecture, urban planning, landscape architecture and interior design to produce unorthodox design solutions born from a strong sensitivity to context and a highly interdisciplinary design process. Each of her projects illustrates the four fundamental elements of her architectural vision: People, Place, Purpose, Poetry. Francine Houben was professor of mobility aesthetics at Delft University of Technology and taught at the universities of Harvard, Yale and Mendrisio. As curator of the First International Architecture Biennale Rotterdam (2003), she brought the theme of the aesthetics of mobility to the forefront of international design consciousness. Francine holds Honorary Fellowships of the Royal Institute of British Architects (RIBA), the American Institute of Architects (AIA), the Royal Architectural Institute of Canada (RAIC) and was granted lifelong membership to the Akademie der Künste in Berlin as well as receiving the International Honorary Fellow Award by the Architecture Institute of Taiwan. In 2014 Francine was named Woman Architect of the Year by the Architects’ Journal and in November 2015 Queen Máxima of The Netherlands presented her with the Prins Bernhard Cultuurfonds Prize for her wide-ranging career. Francine was awarded Honorary Doctorates from the Université de Mons, Belgium (2017) and the Utrecht University (2016). In 2018 she received the BNA Kubus Award for her oeuvre; the International Prize, Prix des Femmes Architectes (2019) and distinguished with the TU Delft Alumnus of the Year (2020). In 2024, King Willem-Alexander appointed Francine Houben as a Knight in the Order of the Netherlands Lion. Christophe Ouhayoun Founding Partner Architect KOZ Architects, France Christophe Ouhayoun is a graduate of the École Nationale Supérieure d’Architecture de Paris-Belleville. He currently serves as a State Architect Advisor in the Aveyron department. In 1999, he co-founded KOZ Architectes with Nicolas Ziesel. A pioneer in wood architecture since 2001, he recently delivered Lot E of the Paris 2024 Athletes’ Village as co-coordinator within the Nexity-Eiffage team. In addition to his architectural work, he co-founded: KOZTO, a workshop dedicated to the creation of up-cycled furniture. PLAN01, a collaborative “”second office”” active from 2003 to 2014, in partnership with Atelier du Pont, BP Architectures, and Philéas. PLAN02, an integrated environmental consulting firm. Alongside his private practice, Christophe Ouhayoun works as a visiting professor at the École Nationale Supérieure d’Arts et Métiers and at the École spéciale d’architecture de Paris. Geoff Denton Partner Architect White Arkitekter, Sweden Geoff Denton is an architect and urban designer who has led residential, educational and mixed-use urban design and architectural projects across the UK, Europe and North America. Educated at Sheffield University in the UK, his career in Sweden notably led him to the role of lead architect for the implementation of Greenwich Millennium Village for Ralph Erskine Architect. This project marked the beginning of his focus on socially and environmentally sustainable urban development and regeneration. He joined White Arkitekter in 2011 and is now a partner and member of the board of directors. During his time at White he has led award winning urban design projects and was responsible for starting White Arkitekter’s London Studio. The studio has been built on the goal to share knowledge and experience of sustainable development and offsite fabrication methods used throughout the Nordics. Key projects developed during the first years of the London studio include the Climate Innovation District in Leeds and the Gascoigne estate regeneration in London. Geoff is now based in Stockholm where he works with diverse complex international projects. His approach to architecture is collaborative and he strongly believes that good design solutions are very much about creating places where people feel secure and invigorated.
