Lesson 1: Introduction to Shearwalls
Lesson 4: Shearwall Design: Capacity vs. Deflection Based Force Distribution
Résumé du cours

Partie 2 : Équation de déflexion à 3 termes ou à 4 termes : Un exemple

Introduction

This video compares the 3-term and 4-term deflection equations in the Canadian version of the Shearwalls Program using a more complex shear wall model. The analysis examines a 10-meter-long structure with three wall segments, considering load cases at 50% and 100% of shear resistance capacity. Results show that at lower loads, the three-term equation predicts slightly higher deflections than the four-term equation, but at full capacity, both equations produce nearly identical results. This confirms the accuracy of the nonlinear approach in high-load scenarios.

Résultats de l'apprentissage

A la fin de cette leçon, vous serez capable de :

  • Compare the 3-term and 4-term deflection equations used in shear wall analysis within the Canadian version of the Shearwalls Program.
  • Analyze the effects of different load scenarios (50% vs. 100% of shear resistance capacity) on deflection calculations.
  • Interpret how material distribution and wall segmentation impact shearwall performance in structural models.
  • Evaluate the accuracy of nonlinear and linear deflection equations under varying load conditions.

Instructional Video (Part 2 of 2)

Video Run Time: 04:04 minutes

This video utilizes one project file and it is available for download below.